您好!欢迎访问安科瑞电气股份有限公司网站!
咨询热线

18721096521

当前位置:首页 > 产品中心 > 电力监控与保护 > 开关柜综合测控装置 > ACREL-100LASD开关柜综合测控装置

ASD开关柜综合测控装置

简要描述:ASD100L一次模拟图动态指示

  • 产品型号:ACREL-100L
  • 厂商性质:生产厂家
  • 更新时间:2024-09-18
  • 访  问  量:218

详细介绍

品牌Acrel/安科瑞应用领域环保,化工,生物产业,制药,综合

1.1 产品概述 1.1 Product overview ASD 系列开关柜综合测控装置用于 3~35kV 户内开关柜,适用于中置柜、手车柜、固定柜、环 网柜等多种开关柜。具有一次回路模拟图及开关状态指示,高压带电显示及核相,自动温湿度控制, 加热回路故障告警,分合闸回路完好指示、分合闸回路电压测量、预分预合闪光指示、电气节点无 线测温,人体感应自动照明,语音提示,电参数测量及 RS485 通讯接口等众多功能,集操作、显示 于一体。产品按功能分为 ASD100LASD100GASD200ASD300ASD310ASD320 六种型号。 ASD series switch cabinet integrated measuring and control device is used for 3-35kV indoor switch cabinet, applying to centrally installed switchgear, trolley cabinet, fixed switchgear, ring main unit and other various switch cabinets. With primary circuit mimetic diagram and switch status indicator, HV live displaying and nuclear phase, automatic temperature and humidity control, heating circuit fault alarm, wireless temperature measurement, tripping circuit and closing circuit supervising, tripping circuit and closing circuit control voltage measurement, pre-tripping circuit and pre-closing indicationbody induction auto lighting, voice prompt, electrical parameter measurement and RS485 communication interface and other numerous functions, it has integrated operation and display into one. The product is classified into ASD100L, ASD100G, ASD200, ASD300, ASD310, ASD320 six models according to its function.

ASD开关柜综合测控装置

ASD开关柜综合测控装置

ASD开关柜综合测控装置

ASD开关柜综合测控装置


            1.5 产品安装 1.5 Product installation ASD 系列开关柜综合测控装置采用面板嵌入式安装,首先柜体盘面上制作规定尺寸的长方形槽 孔,装置取下支架后嵌入槽孔,再用支架固定即可。 Panel embedded installation is adopted for ASD series switch cabinet integrated measuring and control device: firstly fabricate rectangular slot with stipulated size on cabinet face; embed the device into the slot after taking down the support and then fix by support                                            

1.5.3 温湿度传感器、无线温度收发器的安装 1.5.3 Installation of temperature and humidity sensor, wireless temperature transceiver ASD 系列产品配套使用的温湿度传感器,可以采用导轨(DIN35mm)安装方式,也可以使 用螺栓固定方式; 无线测温接收器直接安装在 ASD 的无线测温接口(61~64),并连接好天线;产 品尺寸外观如图 1.7 所示。 The temperature and humidity sensor used as ancillary with ASD series products can adopt guide rail (DIN35mm) installation or bolt fixing; the wireless temperature transceiver is directly installed on the wireless temperature measurement interface (61 ~ 64) of ASD and connected with the antenna; as shown in Figure 1.7




产品咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
扫一扫,关注微信
地址:上海嘉定区育绿路253号 传真:021-69153629
©2024 安科瑞电气股份有限公司 版权所有 All Rights Reserved.  备案号:沪ICP备05031232号-89  电瓶车充电桩、电动汽车充电桩禁止非法改装!